An AC is necessary when it comes to delivering conducive temperatures during hot days. To have effective cooling equipment, start by selecting a properly-sized system and the right location to install it. And this task is best left to professionals. This is because wrong positioning may hinder your unit's efficiency and decrease its performance. 

When you involve an AC contractor in your unit's installation, they will first evaluate your building's setting to find a suitable location to install the equipment for effective temperature regulation. Below are guiding tips on finding the right AC location.

Provide Enough Space For Outdoor Unit

Your condenser unit dissipates heat outdoors from the refrigerant. However, if it lacks enough space to draw fresh air and vent itself, it will not let out heat effectively. Consequently, the compressor may overheat and burn. 

Therefore, it is vital to hire an AC repair expert to set up the condenser unit outdoors with adequate space around it. In addition, they should place the unit in an obstacle-free location that is accessible for tune-ups.

Keep It Away From Heat Sources

If you place your unit near heat sources, your AC will overwork to cool your house. This is because the sensor will be getting erroneous readings, hence cooling your home beyond the set temperature. Consequently, your house will become too cold while the AC consumes more energy. 

So, you should contact an AC contractor to install your outdoor unit on the ground in a location with shady ventilation. Furthermore, they will place the indoor unit away from surfaces with constant temperature fluctuation for effective temperature control.

Place The Condenser Unit High Enough

Once you have established your outdoor unit's location, ensure it is high enough. This is because laying the unit on the ground that is not flat may cause the unit to topple due to the lack of stability. Furthermore, uneven grounds might flood after rainfall and result in damage to the internal components of your unit. 

Therefore, you should engage an AC repairer to mount the condenser unit high on a stable slab. This will ensure the unit does not stress the pipework and prevents plants from growing through it.

Place The System Near A Power Source

An AC requires power to run. Thus, you should install the unit near a power source to avoid running extension cords to connect it to an outlet. Also, air conditioners are large-draw appliances that may overload your power adapter and cause a short circuit. So, hire an AC expert to install the unit near a power outlet.

Proper placement of your AC will ensure it runs efficiently to cool your home. Thus, you should contact a residential AC contractor to install your system in an ideal location for peak performance.

To learn more, contact a residential air conditioning contractor in your area today.